Stainless Steel Drop-In Anchors (Hex Nut)

Expansion Anchors
> Download PDF Brochure (31.7 KB)

<< Prev | Next >>

Stainless Steel Drop In Anchors
4000 PSI Concrete
Type 303, 304 and 316 Stainless

For safe working loads (allowable loads) do not exceed 25% of ultimate load.

Note: 7/8 and 1" diameter carbon steel also available from stock.

Anchor Size	Thread Length	Embedment	Hole Diameter	Concrete PSI		Average Ultimate Load Tension (Pounds)	Average Ultimate Load Shear (Pounds)
1/4 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 7/8 1	7/16 in. 5/8 in. 5/8 in. 5/8 in. 3/4 in. 3/4 in. 3/4 in. 7/8 in. 7/8 in. 7/8 in. 1 1/4 in. 1 1/4 in. 1 1/4 in. 1 1/8 in. 1 3/8 in.	1 in. 1 9/16 in. 1 9/16 in. 1 9/16 in. 2 in. 2 in. 2 in. 2 1/2 in. 2 1/2 in. 2 1/2 in. 3 in. 3 in. 3 in. 3 1/2 in. 4 in.	3/8 in. 1/2 in. 1/2 in. 1/2 in. 5/8 in. 5/8 in. 5/8 in. 7/8 in. 7/8 in. 7/8 in. 1 in. 1 in. 1 in. 1 1/8 in. 1 3/8 in.	4000 3000 4000 5000 3000 4000 5000 3000 4000 5000 3000 4000 5000 4000 4000		1932 3666 4040 4136 4010 6960 7313 9690 10466 11385 12986 15020 16776 25790 32670	2390 4794 4980 5960 8080 11480 12444 13110 18105 20140 14496 20220 23230 31660 42224

328 Maddox Drive | Ellijay, Georgia 30540 | 800-749-1115 | Fax 706-636-1882

info@fmstainless.com

Back To Top